Faculty Research Publications

Khalid, F., Khan, A. U. R., & Fareed, S. (2025). Pre-and post-peak stress-strain response of recycled aggregate concrete: Experimental and numerical investigation. Computers and Concrete, 35(5), 483-495.

Khalid, F., Khan, A. U. R., & Fareed, S. (2025). Estimation of parameters for constitutive modelling of recycled aggregate concrete using artificial neural networks. Engineering Computations, 42(4), 1471-1501. https://doi.org/10.1108/EC-07-2024-0679

Khan, M. S., Rafi, M. M., Humberto, V. (2025). Experimental Behavior of Concrete Columns Reinforced with Thermomechanically Treated and Cold-Twisted Ribbed Steel Bars. ACI Structural Journal, 122(3), 57–70. https://doi.org/10.14359/51744392

Khan, M. S., Rafi, M. M., & Varum, H. (2025). Effects of Lateral Confinement on Concrete Columns Reinforced with Steel Bars with Uncertain Yield Strength. Journal of Structural Design and Construction Practice, 30(4), 04025097. https://doi.org/10.1061/JSDCCC.SCENG-1695

Rafi, M. M., Mohammad, A. F., Ahmed, M., Khan, M. S., Rais, A., & Baig, M. K. A. (2025). Tsunami Fragility Functions for Low-Rise Reinforced Concrete Buildings for Enhancing Coastal Resilience. Journal of Structural Design and Construction Practice, 30(4), 04025086. https://doi.org/10.1061/JSDCCC.SCENG-1804

Raza, M. A., & Mohammad, A. F. (2025). Tsunami-Resilient Building Assessment for Coastal Community of Karachi. Construction Technologies and Architecture, 15, 3-9.

Khan, R. A., Mohammad, A. F., Haseeb, A., Hammad, M., Siddiqui, M. A., & Lodi, S. H. (2025). Android-based framework for condition assessment of existing RC hospital buildings. Proceedings of the Institution of Civil Engineers-Structures and Buildings, 178(1), 73-93. https://doi.org/10.1680/jstbu.23.00122

Mohammad, A. F., Faggella, M., Khan, R. A., Haq, S. U., & Saim, M. (2025). Seismic Evaluation of Plan Asymmetry Effects in an Older Infill Framed Reinforced Concrete Building Structures. Engineering Reports, 7(3), e13114.https://doi.org/10.1002/eng2.13114

Mohammad, A. F., Khan, R. A., Nasir, R., MUHAMMAD, H. A., & Iqbal, F. (2025). Seismic evaluation of existing reinforced concrete bridges in Karachi (Pakistan) with lightweight concrete in deck slab. Roads & Bridges/Drogi i Mosty, 24(2). https://doi.org/10.7409/rabdim.025.009

Alam, Q. M., Mohammad, A. F., & Mobeen, S. S. (2025). Evaluation of Effects of Pounding on RC Building Structures under Strong Seismic Events. Construction Technologies and Architecture, 17, 149-156. 10.4028/p-5qSitm

Alam, Q. M., Mohammad, A. F., & Mobeen, S. S. (2025). Seismic Response of Structures Subjected to Pounding under Mainshock-Aftershock Sequences. Construction Technologies and Architecture, 17, 165-171. 10.4028/p-aIr6rh

Mohammad, A. F., Qadri, M. O. R., & Khan, R. A. (2025, June). Corrosion in concrete structures: case study of an existing I-girder bridge. In Proceedings of the Institution of Civil Engineers-Bridge Engineering (Vol. 178, No. 3, pp. 319-334). Emerald Publishing Limited. https://doi.org/10.1680/jbren.24.00017

Fatima, A., Sangi, A. J., & Mohammad, A. F. (2025). Blast-induced damage in reinforced concrete buildings: effect of pulse shape variations. Proceedings of the Institution of Civil Engineers-Structures and Buildings, 1-17. https://doi.org/10.1680/jstbu.24.00046

Fareed, S., Asad, J., & Khan, A. U. R. (2025). Simulation of Reinforced Concrete Slabs in Residential Buildings Under Internal Gas Blast. Arabian Journal for Science and Engineering, 50(3), 1833-1850. https://doi.org/10.1007/s13369-024-09100-8

Strileski, M., Bukhary, S.S. and Batista, J.R., (2025). Management of Phosphorus from Enhanced Biological Phosphorus Removal Recycle Streams Using Lanthanum Chloride. Journal of Environmental Engineering, 151(1), p.04024067. https://doi.org/10.1061/JOEEDU.EEENG-7750

Ifrahim, M. S., Sangi, A. J., Kumar, R., & Owais, M. (2025). Numerical Study on Moment Redistribution in Continuous Concrete Beams Reinforced with FRP Bars, Fusion Journal of Engineering and Sciences. https://doi.org/10.64615/fjes.1.SpecialIssue.2025.47

Alina Fatima, Abdul Jabbar Sangi, and Aslam Faqeer Mohammad (2025), Blast-induced damage in reinforced concrete buildings: effect of pulse shape variations, Proceedings of the Institution of Civil Engineers - Structures and Buildings, https://doi.org/10.1680/jstbu.24.00046 https://doi.org/10.1680/jstbu.24.00046

Celal Cakiroglu, Farnaz Batool, Abdul Jabbar Sangi, Bushra Fatima, Moncef L. Nehdi (2025) Explainable Machine Learning Predictive Model for Mechanical Strength of Recycled Ceramic Tile-Based Concrete, Materials Today Communications, 112139, ISSN 2352-4928, https://doi.org/10.1016/j.mtcomm.2025.112139 . https://doi.org/10.1016/j.mtcomm.2025.112139

Fatima, B., Batool, F., Sangi, A.J. (2025), Experimental investigation on the use of ceramic tiles as aggregates in concrete, Innovative Infrastructure Solutions, 10:76, https://doi.org/10.1007/s41062-025-01889-z

Ifrahim, M. S., Sangi, A. J., & Khan, S. (2025). Experimental Study on Bond Performance between Concrete and BFRP Bars. Construction Technologies and Architecture (Vol. 15, pp. 85–92). Technology Enabled Civil Infrastructure Engineering & Management Conference. Trans Tech Publications Ltd. https://doi.org/10.4028/p-3vti7x

Barakzai, E.S., Batool, F., Sangi, A.J. (2025), Geometrical design optimization of foamcrete composite roof panel using thermal simulation, Journal of Building Engineering, Volume 99, 111581, ISSN 2352-7102, https://doi.org/10.1016/j.jobe.2024.111581. (https://www.sciencedirect.com/science/article/pii/S2352710224031498)
https://doi.org/10.1016/j.jobe.2024.111581

Riaz, M. T., Ali, S. M. S., Ahmed, R. R., Saeed, T., & Ahmed, S. (2025). Integrating Sustainability into Construction Contracts: Evaluating Standard Forms for Effective Implementation in Pakistan. Fusion Journal of Engineering and Sciences. https://doi.org/10.1016/j.jobe.2024.111581

Rahimian, A., Ahmed, R. R., Fazeli, A., Aghdam, E., Kumar Singh, A., Naji, M., ... & Zayed, T. (2025). Examining the Barriers to the Adoption of IoT-Based Technologies in Green Buildings. Journal of Construction Engineering and Management, 151(3), 04024211. https://doi.org/10.1061/JCEMD4.COENG-14231

Ashrafi, S.M.Y, Alaloul, W.S., Farooqui, R., Saqib, M., Ahmed, R.R. & Khan, A.M. (2025): Evaluation and classification of risk from multi-party stakeholders of the construction industry, Journal of Asian Architecture and Building Engineering, DOI: 10.1080/13467581.2025.2507863. https://doi.org/10.1080/13467581.2025.2507863

Hassan, M. K., Siddiqui, A., Ahmed, R. R., Ahmed, A., Tanoli, M. A., & Ali, R. (2025). Mechanical and microstructural characterization of recycled plastic waste in sustainable building applications. Stroitel'stvo Unikal'nyh Zdanij i Sooruzenij, (1), 1-12. 10.4123/CUBS.115.6

Khan, A. U. R., Fareed, S., & Khalid, F. (2024). Simulation of Reinforced Recycled Aggregate Concrete Frames Subjected to Seismic Loading. https://doi.org/10.1007/s13369-024-09172-6 Arabian Journal for Science and Engineering, 1-15.

Khalid, F. & Razbin, M. (2024). Modeling peak ground acceleration for earthquake hazard safety evaluation. Scientific Reports 14, 31032. https://doi.org/10.1038/s41598-024-82171-7

Rafi, M. M., & Khan, M. S. (2024). Comparison of Seismic Performance of Adobe Structures Strengthened with Two Different Schemes. Journal of Earthquake Engineering, 28(13), 3797–3819. https://doi.org/10.1080/13632469.2024.2354862

Rafi, M. M., & Khan, M. S. (2024). Assessment of Use of Steel Bars with Unintended High Strength in Tied Columns. ACI Structural Journal, 121(5), 65-76. https://doi.org/10.14359/51740852

Khan, M. S., Rafi, M. M., Farid, M. D., & Humberto, V. (2024). Seismic Performance of Concrete Columns Reinforced with Hot-Rolled Thermo-mechanically Treated Steel Bars. Journal of Earthquake Engineering, 29(2), 396–420. https://doi.org/10.1080/13632469.2024.2427679

Fareed, S., Zahid, B., & Khan, A. R. (2024). Mechanical properties of Kevlar and jute fiber reinforced concrete. J Sustain Const Mater Technol, 9(2), 128–137. https://doi.org/10.47481/jscmt.1500347

Khan, AuR., Fareed, S. & Khalid, F. Simulation of Reinforced Recycled Aggregate Concrete Frames Subjected to Seismic Loading. Arab J Sci Eng (2024). https://doi.org/10.1007/s13369-024-09172-6

Fareed, S., Asad, J. & Khan, AuR. Simulation of Reinforced Concrete Slabs in Residential Buildings Under Internal Gas Blast. Arab J Sci Eng (2024). https://doi.org/10.1007/s13369-024-09100-8

S. Fareed, A. F. Muhammad and A. Alluqmani," Parameters Influencing the Behaviour of RC Flat-Slabs Under Column-Loss Scenario", Journal of Al-Azhar University Engineering Sector, vol. 19, pp. 514-523, 2024.

Asad-ur-Rehman Khan, A. Ayub, A. Qadir & S. Fareed (2024) Rutting performance of cement-treated base and hot mix asphalt layer in flexible pavements containing recycled concrete aggregates, International Journal of Pavement Engineering, 25:1. https://doi.org/10.1080/10298436.2023.2297945

Shamsoon Fareed & Asad-ur-Rehman Khan (2023) Behavior of reinforced recycled aggregate concrete beams and slabs strengthened in flexure and punching with CFRP composites, The Journal of The Textile Institute. https://doi.org/10.1080/00405000.2023.2281020

Khan, AuR., Fareed, S. & Aziz, T. Residual Mechanical Properties of Concrete with 30% Recycled Concrete Aggregates Exposed to Elevated Temperatures. Iran J Sci Technol Trans Civ Eng (2023). https://doi.org/10.1007/s40996-023-01253-0

Fareed, S. Ayub, L. and Khan, AuR., 2023. Simulation of Size Effect and Strength Prediction in Normal to Ultra High Strength Concrete Shear Deficient RC Beams. Advances in Civil Engineering Materials, 12(1), pp.251-270. https://doi.org/10.1520/ACEM20230001

Fareed, S., Muhammad, A. F., & Alluqmani, A. E. (2024). Parameters Influencing The Behaviour of Rc Flat-Slabs Under Column-Loss Scenario. Journal of Al-Azhar University Engineering Sector, 19(71), 514-523.

Bukhary, S. S., & Moin, S. (2024). Tree-ring based precipitation reconstruction for Skardu in the Upper Indus Basin. Journal of Xi’an Shiyou University, Natural Science Edition, 20(7).

Moin, S., & Qasim, S. (2024). Effect on dynamic parameters of waste reinforced soil under vibrations generated through traffic loading: Experimental evaluation. Journal of Engineering Research, 13 (2). https://doi.org/10.1016/j.jer.2023.12.011

Marri, A., Muhammad, G., Ali, Z., Yousufani, S. H. S., & Moin, S. (2024). Fibre and fabric characterization of soil bags used for erosion control of embankments. Journal of Xi’an Shiyou University, Natural Science Edition, 20(1).

Marri, A., Muhammad, G., Ullah, F., Ali, Z., & Moin, S. (2024). Effect of wheat straw on the dynamic properties of clayey soils. Journal of Xi’an Shiyou University, Natural Science Edition, 20(1).

Bukhary, S., and Masood, A., (2024). A dendrohydrological analysis for reconstructing river discharge to understand long-term hydrologic variability. Journal of Xi’an Shiyou University, Natural Science Edition, Volume 20 (7), pp. 46-51.

Bukhary, S., and Moin, S., (2024). Tree-ring based precipitation reconstruction for Skardu in the Upper Indus Basin. Journal of Xi’an Shiyou University, Natural Science Edition, Volume 20 (7), pp. 361-366.

Bukhary, S., Abdi, S.M.A., (2024). Seismic Liquefaction Susceptibility and Ground Deformation Evaluation using Geotechnical Characterization. Journal of Xi’an Shiyou University, Natural Science Edition, Volume 20 (7), pp.197-213.

Batool, F., Naqvi, S., Faisal, S., Sangi, A.J. et al. (2024) ‘Characterization of Denim Effluent Treatment Plant Sludge and its Influence on Concrete Hardened Properties, Iranian Journal of Science & Technology Transactions of Civil Engineering. https://doi.org/10.1007/s40996-024-01476-9

Ifrahim, M., & Sangi, A.J (2024), ‘Experimental and Numerical investigation of Short Concrete Columns Reinforced with BFRP bars under Concentric Loading’. Technical Journal, 3(ICACEE), 148-157,

Ifrahim, M.S., Sangi, A.J., (2024), ‘Numerical Study on Flexural Behaviour of Steel-GFRP Hybrid-Reinforced Concrete Beams’. Construction Technologies and Architecture, Vol. 13, pp. 103–108, https://doi.org/10.4028/p-ocbyf0.

Ali, S., Beg, T., Farrukh, M., Siddiqui, M. O. R., & Sun, D. (2024). Enhancement of hot mix asphalt (HMA) properties using waste polypropylene. Environmental Engineering and Management Journal. http://doi.org/10.30638/eemj.2024.193

Ali, S., Siddiqui, M. O. R., & Ali, H. (2024). Performance evaluation of flexible pavement using polyethylene terephthalate (PET). Mehran University Research Journal of Engineering and Technology, 43(3), 126-135.

Ahmed, A., Ali, S., Ahmed, A., & Khan, F. (2024). Investigating the Impact of Domestic Sewage on Asphalt Concrete Pavement Strength. Engineering, Technology & Applied Science Research, 14(2), 13617-13623. https://doi.org/10.48084/etasr.6736

Ali, S., & Ejaz, A. (2024). Effect of Recycled Concrete Aggregates (RCA) for Rutting Susceptibility in Flexible Pavement. Construction Technologies and Architecture, 13, 41- 48. https://doi.org/10.4028/p-Ybe4Or

Mohammad, A. F., Khan, R. A., Fatima, E. B., Shaukat, E. A., & Mujtaba, E. M. (2023). Seismic vulnerability assessment of masonry buildings in Karachi. Asian Journal of Civil Engineering,24(1),137-151. https://doi.org/10.1007/s42107-022-00493-1

Fatima, A., Sangi, A. J., Mohammad, A. F., & Joohi, M. (2023, April). Global response of reinforced concrete framed building under varying blast load pulse shapes. In Structures (Vol. 50, pp. (482-493). Elsevier. https://doi.org/10.1016/j.istruc.2023.02.001

Mohammad, A. F., Faggella, M., Gigliotti, R., & Spacone, E. (2023, July). Evaluation of modelling uncertainties impact in older infilled frame RC structures. In Structures (Vol. 53, pp. 764-778). Elsevier. https://doi.org/10.1016/j.istruc.2023.04.109

Moin, S., Marri, A., & Qasim, S. (2023). Effect of input parameters on dynamic characteristics of clayey soil through dynator, a non-destructive test. Journal of Jilin University (Engineering and Technology Edition), 42(11). https://doi.org/10.5281/zenodo.10123897

Qasim, S., Moin, S., Bano, H., Ullah, F., Memon, R. M., Khan, F., & Sikander, F. (2023). Students’ concern towards landslide issues in Northern hilly areas of Pakistan. Journal of Xi’an Shiyou University, 19(2).

Qasim, S., Bano, H., Moin, S., Ali, S., ul Haq, E., Farhan, H., Maaz, M., Hamza, M., Khan, F., & Sikander, F. (2023). Probabilistic analysis of the slope of Nai Gaj Dam during rainfall infiltration. Journal of Xi’an Shiyou University, 19(1).

Ifrahim, M. S., Sangi, A. J., & Ahmad, S. H. (2023, October). Experimental and numerical investigation of flexural behaviour of concrete beams reinforced with GFRP bars. In Structures (Vol. 56, p. 104951). Elsevier. https://doi.org/10.1016/j.istruc.2023.104951

Ifrahim, M. S., Sangi, A. J., & Ahmad, S. H. (2023). Numerical modelling of circular reinforced concrete columns confined with GFRP spirals using fracture-plastic model. Computers and Concrete, 31(6), 527. https://doi.org/10.12989/cac.2023.31.6.527

Ifrahim, M. S.; Sangi, A. J. & Ahmad, S. H. (2023), ‘Experimental and numerical investigation of flexural behaviour of concrete beams reinforced with GFRP bars’, Structures, 56, 104951. https://doi.org/10.1016/j.istruc.2023.104951

Alina Fatima, A.J. Sangi, Aslam F. Mohammad, Maleeha Joohi (2023), 'Global response of reinforced concrete framed building under varying blast load pulse shapes', Structures 50, 482-493, ISSN 2352-0124. https://doi.org/10.1016/j.istruc.2023.02.001

Mohammad, A.F., KHALID, F., & Khan, R.A. (2022). Finite element micro-modelling of RC frames with variant configurations of infill masonry. Structural Engineering and Mechanics, An International Journal, 81(4), 395-409. 10.12989/sem.2022.81.4.395

Farnaz Batool, Abdul Jabbar Sangi, Muhammad Saad Khan, Kamrul Islam (2022), 'Material characterization of a historical wall by using destructive and non-destructive techniques', Structures 46, 1669-1678, ISSN 2352-0124, https://doi.org/10.1016/j.istruc.2022.11.006

Zhang, X., & Ahmed, R. R. (2022). A queuing system for inert construction waste management on a reverse logistics network. Automation in Construction, Impact Factor (7.70), 137, 104221. https://doi.org/10.1016/j.autcon.2022.104221

Tabatabaee, S., Mohandes, S. R., Ahmed, R. R., Mahdiyar, A., Arashpour, M., Zayed, T., & Ismail, S. (2022). Investigating the barriers to applying the internet-of-things-based technologies to construction site safety management, Impact Factor (3.390), 19(2), 868. 10.3390/ijerph19020868

Ali, S., Siddiqui, M. O. R., Noman, S. M., Beg, T., & Sun, D. (2022). Class C fly ash as a substitute for mineral fillers in asphalt mixtures. Polimery, 67(9), 438-449. 10.14314/polimery.2022.9.5

Khalid, F., Khan, A. U. R., & Fareed, S. (2021). Elasto-Damage constitutive modelling of recycled aggregate concrete. Computers and Concrete, An International Journal, 28(1), 13-23. https://doi.org/10.12989/cac.2021.28.1.013

Ali, S., Siddiqui, M. O. R., Ahmed, A., Iqbal, K., Noorani, M. U., Sun, D., & Iqbal, W. (2021). Performance evaluation of hot mix asphalt using textile waste. Industria Textila.

Khan, S., Ahmed, A., Ali, S., et all (2020). Use of Scrapped Rubber Tires for Sustainable Construction of Manhole Covers. Journal of renewable Material. Volume 9, Issue 5, 2 November 2020, Pages 1013-1029. https://doi.org/10.32604/jrm.2021.014344

Memon, R. M., Khiani, R. K., Ali, S., Mustafa, T., & Pasha, Y. N. (2020). Traffic Congestion Issues, Perceptions, Experience and Satisfaction of Car Drivers/Owners on Urban Roads. Mehran University Research Journal of Engineering and Technology, 39(3), 489- 505. 10.22581/muet1982.2003.04